The ASK LAMP-001 projector lamp will run for approximately 1500 -2000 hours before needing to be replaced. It’s critical to buy and install a genuine ASK LAMP-001 rather than a generic lamps. ..
The ASK LAMP-001 projector lamp will run for approximately 1500 -2000 hours before needing to be replaced. It’s critical to buy and install a genuine ASK LAMP-001 rather than a generic lamps. ..
When the red indicator (found beside the lens) lights up, it’s time to replace the ASK Impression A8 projector lamp. Wondering how many hours are left with the ASK LAMP-001? The hours can be found ..
Follow our quick guide to replace your projector lamp for the Sanyo PLC-XU50 / PLC-XU55 projector. One of the first indications that your projector lamp is reaching it’s end of life is when the picture ..
STEP-BY-STEP INSTRUCTIONS FOR PLC-XU25 LAMP REPLACEMENT If your projector Sanyo PLC-XU25 lamp no longer turns on, it needs to be replaced. If the picture is dim or looks unnatural the Sanyo POA-LMP55 ..
The Sanyo POA-LMP53 (service part no 610 303 5826) should last between 1,000 to 3,000 hours depending on how often the projector is used and whether proper maintenance is done on a regular basis. ..
Avoid the nightmare scenario of having your projector not work for the important presentation by knowing when it’s time to replace the lamp in your Sanyo PLC-XW15 projector. Watch for the yellow ..
The blinking orange light on your Sanyo PLC-8805B/PLC-8805P means it’s time for a new lamp. Follow our easy replacement instructions to learn how to replace the projector lamp for the Sanyo PLC-8805B/PLC-8805P ..
The lamp on your Sanyo PLC-XR301 projector should last between 1,000 to 2,000 hours depending on the usage and regular maintenance. When the Sanyo POA-LMP132 (service parts no 610 345 2456) projector ..
When the Sanyo POA-LMP132 (service parts no 610 345 2456) nears the end of life, the Lamp life control menu will begin blinking yellow on your Sanyo PLC-XR201/PLC-XR251 projector. The Lamp replacement ..
The Sanyo POA-LMP131 (service parts no 610 343 2069) lamp on your Sanyo PLC-XU301/PLC-XU301K is the main source of light for your projector and when it stops working the whole machine will shut down. ..