When to replace the Sanyo POA-LMP55 projector lamp

The Sanyo POA-LMP55 (service part no 610 309 2706) will give you between 1,000 to 3,000 hours of  lamp life before needing to be replaced.   The exact amount of time will vary depending on how much your projector is used and how regularly the air filters are cleaned. (Clogged air filters cause the projector to heat up and this puts stress on the lamp.)

Watch for warning signs that your Sanyo POA-LMP55 (610 309 2706) needs to be replaced immediately:
1. The Lamp Replace Indicator begins to blink yellow.
2. The picture becomes quite dim.
3. The colors displayed look unnatural or are very dull.
Avoid installing any knock-offs lamp since they have much shorter life spans due to their inferior workmanship and materials. They are also prone to explosions and can harm the sensitive components in your projector. Installing a generic projector lamp also voids the warranty on your projector. Walk away from lamps with a price tag that seems too good to be true. The few dollars you save are not worth. Learn the 7 tips for spotting counterfeits lamps and protect yourself from installing a generic lamp.
Scroll down for links to step-by-step instructions on replacing the Sanyo POA-LMP35 (service part no 610 293 2751) lamp for each of these projectors.

Projectors compatible with the Sanyo POA-LMP55 (610 309 2706) projector lamp:

Sanyo PLC-XL20

Sanyo PLC-XU25

Sanyo PLC-XU47 / PLC-XU48

Sanyo PLC-XU50 / PLC-XU55

Sanyo PLC-XU51

Sanyo PLC-XU58

For step-by-step instructions on replacing your Sanyo POA-LMP55 (service part no 610 309 2706) projector lamp, click on your projector listed below:

Click here for step-by-step instructions on how to change the Sanyo POA-LMP55 (service part no 610 309 2706) projector bulb for the Sanyo PLC-XL20 projector.

 
 
 
 
 

Click here for step-by-step instructions on how to change the Sanyo POA-LMP55 (service part no 610 309 2706) projector bulb for the Sanyo PLC-XU25 projector.

 
 
 
 

Click here for step-by-step instructions on how to change the Sanyo POA-LMP55 (service part no 610 309 2706) projector bulb for the Sanyo PLC-XU47 / PLC-XU48 projector.

 
 
 
 

Click here for step-by-step instructions on how to change the Sanyo POA-LMP55 (service part no 610 309 2706) projector bulb for the Sanyo PLC-XU50 / PLC-XU55 projector.

 
 
 
 

Click here for step-by-step instructions on how to change the Sanyo POA-LMP55 (service part no 610 309 2706) projector bulb for the Sanyo PLC-XU51 projector.

 
 
 
 

Click here for step-by-step instructions on how to change the Sanyo POA-LMP55 (service part no 610 309 2706) projector bulb for the Sanyo PLC-XU58 projector.