When to replace your Sanyo POA-LMP31 projector lamp

Depending on usage and the regular maintenance done on your projector, a newly installed Sanyo POA-LMP31 (service parts no 610 289 8422) lamp should last between 1,000 to 3,000 hours before end of life.
Simplify your life and buy an authentic lamp. It’s worth paying the few extra dollars to be guaranteed a projector lamp that will work and will keep your warranty intact.
Remember:  When you purchase from a guaranteed supplier you’ll be getting a lamp specifically manufactured to meet the specifications of your projector. Knock-off lamps can be tempting because of their lower prices. But these generic lamps are usually made with counterfeit parts that are inferior and can damage the sensitive mechanisms in your Sanyo projector. The few dollars you save upfront may end up costing you more. Protect yourself against unreliable knock-offs using inferior and dangerous parts.

Projectors using the Sanyo POA-LMP31 lamp:

• Sanyo PLC-XW10

• Sanyo PLC-SW15

• Sanyo PLC-XW15

Scroll down for links to step-by-step instructions on replacing the Sanyo POA-LMP31 (service parts no 610 289 8422)  lamps for each of these projectors.

For step-by-step instructions on replacing your Sanyo POA-LMP31 (610 289 8422) lamp, click on your model listed below:

 

Click here for step-by-step instructions on how to change the Sanyo POA-LMP31 (service parts no 610 289 8422) projector lamp for the Sanyo PLC-XW10.

 
 
 
 
 
 

 

Click here for step-by-step instructions on how to change the Sanyo POA-LMP31 (service parts no 610 289 8422) projector lamp for the Sanyo PLC-SW15.

 
 
 

Click here for step-by-step instructions on how to change Sanyo POA-LMP31 (service parts no 610 289 8422) projector lamp for the Sanyo PLC-XW15.